Arcadia, OH Classified Ad Listings

i make these hoover bits - oil cooler sealing frame, for aftermarket scat and empi 36hp shrouds . This is #1 most over looked and forgotten part on a vw engine rebuild, these are laser cut, production bent, i add a second piece of metal at the corner for strength, also add a seciont of metal to properly seal the opening, threaded insert is aluminum, so it will never rust to the screw. dont lose...

for some reason i have 8 of these, they are numbered 1 thru 9, #5 is missing, i have no idea what years fit what, you can see they have slight differences, all have throttle bodies mounted, no idea on the other parts, 2 have long tubes, if you dont need that, will reduce shipping cost tell me which number you want and give zip, will calculate total cost i use paypal, but have other ways if inte...

these flaps are 100% brand new, they are made in the full open position for folks that want to make sure the air goes the right places but do not want to run working thermostat flaps, These are laser cut steel, welded together, aluminium threaded inserts used so can never get rusted in place and satin black powdercoated for a lifetime finish. These flaps provide the proper air flow direction fo...

This is a 100% new unit, for the VW based TYPE IV engines, Type IV (68-74), late bus (72-83), Porsche 914 (70-76), late 912 (68,69,76) All units come with a 2 year warranty. This is for carb or FI engines & the stat starts to open at 85-90C. see the pics, stamped on the bottom is: - made in the "USA" - cracking temp range in deg C - the Awesome Powdercoat logo - each thermostat is individually ...

these are the shields you need when you are running thermostat flaps, but not heater boxes, this fill the gap left by removing the heater boxes, they attach to the sled tins. these are laser cut, bent, powdercoated satin black, shipping is $10 to the lower 48 states, i use paypal I also sell industrial shields with mounting tabs to attach to the heads to prevent movement, look for them here

These flaps are 100% brand new, made by Awesome Powdercoat LLC in Ohio, USA. This picture is of a pre-production prototype, details include: flaps are laser cut from 22 gauge steel, ribs are rolled and the then fixture bent. tube is 6mm diameter, fixture bent, with alignment ring and cable attachment brazed on production spring will be exact reproduction of factory spring saddle bearings are 3D...

the type iii oil cooler has a fitting on the side for a pressure switch, i make these hoover bits - oil cooler sealing frame, can be made for either stock vw or aftermarket scat and empi 36hp shrouds . This is #1 most over looked and forgotten part on a vw engine rebuild, these are laser cut, production bent, i add a second piece of metal at the corner for strength, also cut the hole to clear t...

This is a 100% new unit, for the 36hp and 40hp based engines, (53-57) All units come with a 2 year warranty. reproduction of VW part number 111 119 159 see the pics, stamped on the bottom is: - made in the "USA" - temp range cracking in deg C - the Awesome Powdercoat logo - each thermostat is individually hand numbered on top for warranty tracking reasons $10 shipping to the lower 48 states. Ot...

i make these hoover bits - oil cooler sealing frame, this is for folks running the wider type iv / porsche 914 oil cooler on a bug engine. you still have to modify the shroud to fit around the wider oil cooler, but this take care of the bottom. This is #1 most over looked and forgotten part on a vw engine rebuild, these are laser cut, production bent, i add a second piece of metal at the corner...

THE CAN-AM SPYDER RT S TRUE COLORS EXPERIENCE LUXURY TOURING Touring at its most luxurious. The Spyder RT Sea-to-Sky s adaptive foam seats, driver backrest and backup camera make every journey blissfully comfortable, allowing you to fully appreciate each new view and its striking good looks create a lasting impression.

i make these hoover bits - oil cooler sealing frame, for stock vw shrouds. this is #1 most over looked and forgotten part on a vw engine rebuild, these are laser cut, production bent, i add a second piece of metal at the corner for strength, threaded insert is aluminum, so it will never rust to the screw. ship is $5 to most places

I have these custom made. This is the proper 23-34C range. Do not confuse this is a normal VW bug stat that is 65-70C. This stat is NOT used on cooling flaps, it is used on ducting of heated air up to the carb air intake. This is a new replacement for Porsche part number 546.06.590 This fits the Porsche 356 (48-65) and the early Porsche 912 (65-67) This is a 100% new unit, for the Porsche 356 &...

i have made several of these over the years and finally decided to offer them for sale to everyone. As you know, industrial shields attach to the bottom two screws on the heater box sleds, and most people are fine with that. However so people worry they may "flap in the wind" and work loose over time. Lucky for us, VW heads have 2 casting bosses on the bottom of the heads that make a perfect pl...

2016 579 Peterbilt ISX Cummins, 13 speed Titled as Motorhome 1998 Featherlite 53' Sprint Car Transporter, good shape for it's age. I just performed major brake service on trailer. New alcoa wheels and tires. Not interested in splitting up up. Will accept reasonable offers.. * Condition: Used. Bloomdale, OH 44817, United States Phone Show phone number Cell Member Since October 2026 Message Seller

Awesome Powdercoat LLC proudly offers American made cylinder tin air vanes for you air cooled VW engine. You've spent a lot of time & money on your engine, you deserve the best possible cooling. Air vanes are proudly made in Toledo, Ohio, USA. The air vanes are laser cut, bent, powdercoated & spot welded to brand new SCAT cylinder tin. Add this improved cooling to your Awesome Powdercoat kit or...

This is a 100% new unit, for the VW based engines, bug, ghia, thing, type III (58-74) and early bus (58-71) All units come with a 2 year warranty. This is for carb engines & the stat starts to open at 65-70C. see the pics, stamped on the bottom is: - made in the "USA" - cracking temp range in deg C - the Awesome Powdercoat logo - each thermostat is individually hand numbered on top for warranty...

for 1.7, 1.8 and 2.0 air cooled engine in type iv, late bus, Porsche 914 and late Porsche 912 engines. This is new, made in USA, type iv thermostat bracket with special washer. This part is laser cut, production bent, blasted and powdercoated in satin black. Shipping is typically $6 All other thermostat related parts are available.

This is a 100% new unit, for the 1600 FUEL INJECTED (75-79) based engines, All units come with a 2 year warranty. The stock FI bug engine uses a higher temp range thermostat. The common bug/ghia carb engine stat starts to open at 65-70C. This stat starts to open at 80-85C. see the pics, stamped on the bottom is: - made in the "USA" - the Awesome Powdercoat logo - each thermostat is individually...

These parts are 100% new, 100% made in the USA. I make all the flaps for all the years. My flaps fit VW and aftermarket fan shrouds. My parts are laser cut for proper fit. My parts are fixture assembled to make sure they fit and work correctly. I compared all the flaps VW has made, German, Brazil, and Mexico, there are differences. I took the best features of each and put them together in 1 set...

This 2020 Kia Optima LX sedan offers a well-rounded combination of fuel efficiency, reliability, and practical features. With 59,182 miles on the odometer, this black exterior with black cloth interior has been completely serviced and safety inspected. As a local trade-in certified accident-free by Carfax, it represents a smart choice for buyers seeking a dependable midsize sedan. Bluetooth con...